Skip to main content
Industries

Food processing technology

Segregated production, no carbon steel: our shop works stainless steel and aluminium only – rust marks never get a chance. For components that go into your food plant in hygienically sound condition.
Request a quote

What matters in food processing technology

Hygiene is something you design in.

For food machinery, the Machinery Directive requires smooth, cleanable contact surfaces without problematic crevices, as few projections and recesses as possible, and the complete drainage of liquids. EU Regulation 1935/2004 requires materials that, in food contact, release no substances in quantities that would affect health, composition or taste. We translate these requirements into sheet, weld and surface – in the design and on the shop floor:

  • Crevice-free construction – gap-free transitions and continuous welds wherever product is in contact
  • Hygienic welds – tight, free of porosity and cleanly dressed
  • Rounded transitions – radii instead of sharp corners, with as few projections and recesses as possible
  • Cleanable surfaces – defined surface finishes, easy to clean and disinfect
  • Complete drainability – falls and drains so that liquids run off entirely
  • Reliable material segregation – segregated production: stainless steel and aluminium with no contact with other types of steel
  • Repeatable surfaces – the same finish across batches and revision levels

From the shop floor

Thin sheet, tightly toleranced

Flour dusters for bakery machines

A thin welded sheet metal structure held to tight tolerances, so that flour is dispensed evenly in time with the machine.
Punched, heavily formed – perfectly flat

Hop sieves

Despite punching and heavy forming, the sheet stays perfectly flat – straightening is part of our process, not rework.
Gauze tensioned without wrinkles

Lint screens

The gauze is tensioned free of wrinkles without distorting the frame – joining and tensioning in one controlled operation.

Typical components & assemblies

Vessels, hoppers & troughs

Welded vessels, hoppers and troughs built to hygienic design.

Sieves & dosing components

Hop sieves, lint screens, dusting and dosing equipment – punched, formed, straightened and meshed.

Process & machine components

Components for cyclic machines, conveying and dosing equipment in product contact.

Frames & work tables

Machine frames, platforms and work tables in stainless steel for wet areas.

Cladding & guard panels

Accurately fitting panels and housings – laser cut, bent, ground.

Plant engineering & air purification

Experience from building complete plant, including air purification systems using UV, ozone and plasma technology within the oxytec group.

Quality you can evidence.

  • Segregated production – stainless steel and aluminium only, no rust marks
  • Materials for food contact – selected in line with EU Regulation 1935/2004 and backed by certificates
  • Hygienic design to the requirements of the Machinery Directive
  • ISO 9001 – certified quality management
  • DIN EN ISO 3834 – verified welding quality

Let’s talk about your project.

Send us your drawing or CAD data by email – together with material, batch size and your requirements. We will come back to you with a sound assessment.

Send an enquiry by email

or write directly to info@stainlesstec.de – simply attach your drawing, STEP or DXF file.

DIRECT LINE: +49 5121 690 85-0